Manual
ASC3
Page 11
2.2.6
Input the Start Order List
It is possible to input the start order (bib list) from an external device to the Startclock ASC3
(e.g. for the second run of an alpine ski race from TdC8001 or Timy). If you do not download
a start order list, the ASC3 starts with bib 1 and increases by one bib after each start (1, 2, 3,
etc.). For downloading start lists you can use the
ALGE-TIMING
startclock software. This is
available as download at our webpage
a) Manual Bib Counter:
If you connect the remote control ASC3-RC you can count the bib up with the
push button
and you can count it down with button
. If you press the button
and
at the same time for 4 seconds it resets the start list and switches to
the first start number of the start list.
b) Bib-Automatic:
At the end of a countdown interval (including the shown negative time) it automati-
cally moves to the next start number.
No Bib on Display:
If the ASC3 should not show a bib number on the display you can switch the bib off by press-
ing the remote control button
for about 6 seconds. To switch it on, press the button
for
six seconds.
Alternatively, you can also set the program parameter <bib> on <on> or <OFF> so it shows
the bib or not.
on ............. bib is shown in display (D)
OFF .......... display (D) is blank
Summary of Contents for ASC3
Page 1: ...Manual Version E140514 ...
Page 39: ...Manual ASC3 Page 39 ...
