Manual
ASC3
Page 37
4.6
Commands for setting data:
4.6.1 SET PROGRAM
PC to ASC3:
=PX
CR
X ................................ program (0-9)
ASC3 to PC:
P=
CR
4.6.2 SET COUNTDOWN TIME
PC to ASC3:
=CS
CR
S ................................ countdown time (0-9)
ASC3 to PC:
C=
CR
4.6.3 SET CLOCK TIME
PC to ASC3:
=THHMMSS CR
ASC3 to PC:
T=
CR
4.6.4 SET START LIGHT
PC to ASC3:
=LXSSTH
CR
X ................................ program (0-9)
SS ............................. seconds (0-20, 0=-10, 20=10)
T ................................ color (0-off, 1-red, 2-yellow, 3-green)
H................................ sound (0-off, 1-high, 2-low)
ASC3 to PC:
L=
CR
4.6.5 SET DISPLAY
Has effect only if device is in slave mode
PC to ASC3:
=D
HHtpMMtpSSmtpssTH
CR
HH ............................. hours
MM ............................ minutes
SS ............................. seconds
M ............................... countdown time minutes
ss .............................. countdown time seconds
T ................................ color (0-off, 1-red, 2-yellow, 3-green)
H ............................... sound (0-off, 1-high, 2-low)
Tp .............................. two points
ASC3 to PC:
D=
CR
4.6.6 GOTO SLAVE MODE
PC to ASC3:
=SLAVE
CR
ASC3 to PC:
S=
CR
4.6.7 GOTO MASTER MODE
PC to ASC3:
=MASTER
CR
ASC3 to PC:
S=
CR
4.6.8 SET BRIGHTNESS
PC to ASC3:
=BX
CR
X ........................................... brightness (0-9)
ASC3 to PC:
B=
CR
Summary of Contents for ASC3
Page 1: ...Manual Version E140514 ...
Page 39: ...Manual ASC3 Page 39 ...