Manual
ASC3
Page 10
The countdown interval can be selected in two different ways:
a) Internal yellow push button (2):
•
Press the yellow push button PB2 (2) and Cd# (# = number from 0 to 9)
is shown in display (F). The number is blinking.
•
In display (E) the set countdown time is shown.
•
With the green push button (1) you can select between 9 different pre-
programmed countdown times.
•
When the desired countdown time is shown in display (E) confirm with
the yellow push button PB2 (2).
•
Display (F) shows the time of day and display (E) the countdown time.
Zero of the new countdown time is the last finished zero time.
b) Remote Control ASC3-RC:
•
Press the button <SET> for 3 seconds and Cd# (# = number
from 0 to 9) is shown in display (F). The number is blinking.
•
In display (E) the set countdown time is shown.
•
Press the button
to move from one countdown interval to
the next countdown interval.
•
When the desired countdown time is shown in display (E) wait
for about 4 seconds and the standard ASC3 program continues.
c) External push button connected at red/black banana socket (5):
•
Press the push button for 3 seconds until display (F) shows Cd# (# =
number from 0 to 9). The number is blinking.
•
Display (E) shows the set countdown time.
•
Press the push button for changing the selected countdown time.
You can select between 9 pre-programmed countdown times.
•
When display (E) shows the countdown time you want to set do not
press the push button. After 3 seconds it is saved automatically.
•
Time of day and running countdown are displayed. Zero of the new
countdown time is the last finished zero time.
d) Manual Countdown:
•
If you select the manual countdown (e.g. program 06 and 00) you
need an external push button to start each countdown as shown in the
picture on the right.
Summary of Contents for ASC3
Page 1: ...Manual Version E140514 ...
Page 39: ...Manual ASC3 Page 39 ...
