ALGE-Timing ASC3 Manual Download Page 33

Page: 33 / 40

Manual

ASC3

Page 33

3.2

Parameter setting by PC

We can offer software to effect the parameter settings by PC. This is much faster and easier.
You can download software from our homepage

www.alge-timing.com

free of charge.

Direct link to download the software:

http://www.alge-timing.com/alge/download/software/Setup%20ALGE-
TIMING%20Start%20Clock.exe

4 Multiport

The Multiport has several functions. This port includes the RS232 interface, the GPS input
signal for time synchronization and the input for the remote control.

4.1

RS232 Interface

The RS232 interface has different functions:

•

Output of time difference of all start times: times from start input (4) (green and black
banana socket) and lead/leg times

•

RS232 interface to control the startclock from a PC (time of day display, countdown
display, horn, start light, speaker)

•

Connection for the printer P5 to print all times online or offline.

Interface parameter:

•

RS232

•

1 start bit, 8 data bit, 1 stop bit, no parity bit

•

2400 baud rate (for printer 2400)

Summary of Contents for ASC3









































Search results

Summary of Contents for ASC3

Reviews:

Related manuals for ASC3

Brands by name

Popular brands

ALGE-Timing ASC3, Manual

Search results

Summary of Contents for ASC3

Reviews:

Related manuals for ASC3

Brands by name

Popular brands