manualshive.com logo in svg

ALDI 704196, User Manual, Page: 6 / 42

Share
Download
ALDI 704196 User Manual Download Page 6

6 

 
General information 

 

General information

General information

Reading and storing the user manual

This user manual accompanies this 3.6 V 

Li-Ion screwdriver (referred to below only 

as the “screwdriver”). It contains important 

information about start-up and handling.

Before using the screwdriver, read the user manual care-

fully. This particularly applies to the safety instructions. 

Failure to heed this user manual may result in severe 

injury or damage to the screwdriver.

The user manual is based on the standards and rules 

in force in the European Union. When abroad, you must 

also observe country-specific guidelines and laws.

Store the user manual for future use. If you pass the 

cordless screwdriver on to third parties, please be abso-

lutely sure to include this user manual.

Explanation of symbols

The following symbols and signal words are used in this 

user manual, on the screwdriver or on the packaging.

This symbol provides you with useful addi-

tional information about start-up or opera-

tion.

FX-5902183-5902184-Bedien-2002.indd   6

FX-5902183-5902184-Bedien-2002.indd   6

18.05.20   15:45

18.05.20   15:45

Summary of Contents for 704196











































Reviews:

No comments