manualshive.com logo in svg

ALDI 704196, User Manual, Page: 21 / 42

Share
Download
ALDI 704196 User Manual Download Page 21

 

Safety

21

 

Safety

g)   Only use the charger for private use in connection 

with a normal household socket. Never attempt 

to connect the charger with a mains socket with a 

different voltage rating.

h)    Always make sure there is adequate ventilation 

when recharging the rechargeable battery. Gases 

may be produced.

i)    Only charge the rechargeable battery in closed 

rooms as the charger is only intended for indoor 

use.

j)   Make sure that no moisture comes into contact 

with the charger. Otherwise there is a risk of elec-

tric shock.

k)   Do not use the charger for purposes other than 

intended. The charger is only intended for charg-

ing the same rechargeable battery also shipped 

with the charger. Using it for purposes other than 

intended may result in fire or a fatal electric shock.

l)   Do not attempt to charge the rechargeable bat-

tery with a charger other than the enclosed one. 

The charger shipped with this power tool and the 

rechargeable battery pack must be used together.

FX-5902183-5902184-Bedien-2002.indd   21

FX-5902183-5902184-Bedien-2002.indd   21

18.05.20   15:45

18.05.20   15:45

Summary of Contents for 704196











































Reviews:

No comments