ALDI 704196 User Manual Download Page 12 | Manualshive

Page: 12 / 42

ALDI 704196 User Manual Download Page 12

12

Safety

Safety

Save all warnings and instructions for future refer-

ence.

The term ““power tool”” in the warnings refers to your

mains-operated (corded) power tool or battery-oper-

ated (cordless) power tool.

Work area safety

a)

Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b)

Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c)

Keep children and bystanders away while oper-

ating a power tool. Distractions can cause you to

lose control.

Electrical safety

a)

Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

FX-5902183-5902184-Bedien-2002.indd 12

FX-5902183-5902184-Bedien-2002.indd 12

18.05.20 15:45

18.05.20 15:45

«
...
10
11
12
13
14
...
»

Summary of Contents for 704196











































Reviews:

No comments