manualshive.com logo in svg

ALDI 704196, User Manual, Page: 25 / 42

Share
Download
ALDI 704196 User Manual Download Page 25

25

 

Before use

•   During the charging process, the red LED on the 

charging level display (1) lights up. When the battery is 

fully charged, all 3 LEDs light up.

•  The battery is overload protected. The charging process 

stops when the rechargeable battery is fully charged. 

Over loading of the rechargeable battery is not possible.

•   The pivot handle screwdriver must not be operated 

during the charging process.

•   Once charging is complete, disconnect the battery 

charger from the mains power socket and the charg-

ing plug from the charging socket on the pivot handle 

screwdriver. 

Displaying the charging level

•   Press the button (2) and 

the 3 coloured LEDs of the 

charging level display (1) 

will indicate the charging 

status of the integrated 

battery pack:

•  

Red: Battery discharged, 

charging required

•  

Red/Yellow: Battery par-

tially discharged

2

1

FX-5902183-5902184-Bedien-2002.indd   25

FX-5902183-5902184-Bedien-2002.indd   25

18.05.20   15:45

18.05.20   15:45

Summary of Contents for 704196











































Reviews:

No comments