manualshive.com logo in svg

ALDI 704196, User Manual, Page: 22 / 42

Share
Download
ALDI 704196 User Manual Download Page 22

m)   Only use the charger to charge the rechargeable 

battery. The charger must not be used as a power 

supply for the power tool.

n)   Do not place any objects on the charger and do 

not cover it as this may cause it to overheat. Do not 

place the charger near a heat source.

o)   Always lay the mains cord so that no one can 

trip over it, step on it or otherwise damage it. 

Otherwise there is a risk of damage to property 

and injury. 

p)   Always disconnect the charger from the power 

supply after use. This way, you will prevent possi-

ble risks. Before any kind of cleaning, disconnect 

the charger by pulling the mains plug out of the 

power supply. Otherwise there is a risk of electric 

shock. 

q)   Never pull out the charger out of the socket by the 

connector cord but using the plug instead. Never 

pull on the cable.

r)   Do not use any extension cords unless it is una-

voidable. Using an extension cord that is not suita-

ble may result in a fire or risk of electric shock.

22 

 
Safety 

FX-5902183-5902184-Bedien-2002.indd   22

FX-5902183-5902184-Bedien-2002.indd   22

18.05.20   15:45

18.05.20   15:45

Summary of Contents for 704196











































Reviews:

No comments