manualshive.com logo in svg

ALDI 704196, User Manual, Page: 38 / 42

Share
Download
ALDI 704196 User Manual Download Page 38

Batteries and rechargeable batteries

Batteries and rechargeable batteries must not 

be disposed of in the household waste! As a 

consumer, you are legally obliged to return all 

batteries and rechargeable batteries whether 

they contain hazardous materials*) or not, to a collection 

point in your community/town/store so that they can be 

disposed of in an environmentally friendly way.

*  Labelled with: Cd = Cadmium, Hg = Mercury, Pb = Lead

Disposing of packaging

Recycle

Sort the packaging before you dispose of it. 

Dispose of paperboard and cardboard with 

wastepaper and plastics with recyclable waste.

Service information

•   Store the pivot handle screwdriver, the operating 

instructions and any accessories in the storage case.

•   FERREX® equipment is, for the most part, mainte-

nance-free. Information on cleaning and maintenance 

can be found in the chapter on „Cleaning and mainte-

nance“.

38 

 
Service information 

 

Service information

FX-5902183-5902184-Bedien-2002.indd   38

FX-5902183-5902184-Bedien-2002.indd   38

18.05.20   15:45

18.05.20   15:45

Summary of Contents for 704196











































Reviews:

No comments