manualshive.com logo in svg

ALDI 704196, User Manual, Page: 42 / 42

Share
Download
ALDI 704196 User Manual Download Page 42

42 

 
General information 

AFTER SALES SUPPORT

00800 34996753

[email protected]

MODEL: FPHS 3.6Va

WU5902183/WU5902184

08/2020

704196

PRODUCED IN CHINA FOR:

Aldi Stores Ltd., PO Box 26, 

Atherstone, Warwickshire CV9 2SH.
Aldi Stores (Ireland) Ltd., 

PO Box 726, Naas, Co. Kildare.

www.aldi.com

Great care has gone into the manufacture of this product and it should 

therefore provide you with years of good service when used properly.  

In the event of product failure within its intended use over the course of the 

first 3 years after date of purchase, we will remedy the problem as quickly 

as possible once it has been brought to our attention. In the unlikely event 

of such an occurrence, or if you require any information about the product, 

please contact us via our helpline support services, details of which are to  

be found both in this manual and on the product itself.

FX-5902183-5902184-Bedien-2002.indd   42

FX-5902183-5902184-Bedien-2002.indd   42

18.05.20   15:45

18.05.20   15:45

Summary of Contents for 704196











































Reviews:

No comments