manualshive.com logo in svg

ALDI 704196, User Manual, Page: 34 / 42

Share
Download
ALDI 704196 User Manual Download Page 34

34 

 
Noise/vibration information 

 

Noise/vibration information

Noise emissions

Sound pressure level L

pA

:  60.96 dB(A)

Uncertainty K: 

3 dB

Sound power level L

WA

: 

71.96 dB(A)

Uncertainty K: 

3 dB

Attention!

During actual use, the vibration and noise emission val-

ues may differ from the levels specified, depending on 

how the power tool is used (in particular on the type of 

workpiece being processed).

Try to keep the noise and vibration emissions as low as 

possible. The following are examples of measures you 

can take to reduce vibration emissions:
•  wearing gloves when using the tool
•  limiting the working hours
•  using accessories that are in good condition
•  maintaining and cleaning the tool regularly
•  switching off the tool when it is not in use
•  avoiding subjecting the tool to excessive loads

The aforementioned values are noise emission values 

and therefore, do not necessarily represent safe values 

for the workplace at the same time. Due to the correla-

FX-5902183-5902184-Bedien-2002.indd   34

FX-5902183-5902184-Bedien-2002.indd   34

18.05.20   15:45

18.05.20   15:45

Summary of Contents for 704196











































Reviews:

No comments