ALDI 704196 User Manual Download Page 20 | Manualshive

Page: 20 / 42

ALDI 704196 User Manual Download Page 20

a) Before using the charger, read through all instruc-

tions and all precautionary measures for the

charger and rechargeable battery. You can find

notes in these instructions and on the device itself

amongst others.

b) Check the charger regularly for damages, par-

ticularly the connector cable and housing. A dam-

aged charger may only be used again after it was

repaired.

c) Do not use the charger if it has been exposed to

impacts or shocks or if it has fallen down or has

been otherwise damaged. Please bring the charg-

er to an authorised technical after sales support for

repair or inspection.

d) Never connect a rechargeable battery that has

burst or been otherwise damaged with the charg-

er. Otherwise there is a risk of electric shock.

e) Do not in any case dismantle the charger. Repairs

may only be performed by an authorised technical

after sales support. Incorrectly performed assem-

blies could pose a risk of fire or electric shock.

f) Never use the charger in environments with explo-

sive or flammable materials. There is a risk of fire

and explosion.

20

Safety

Safety

FX-5902183-5902184-Bedien-2002.indd 20

FX-5902183-5902184-Bedien-2002.indd 20

18.05.20 15:45

18.05.20 15:45

«
...
18
19
20
21
22
...
»

Summary of Contents for 704196











































Reviews:

No comments