manualshive.com logo in svg

Alcatel-Lucent 7950, Quality Of Service Manual

The Honeywell 7950 is a cutting-edge device designed to enhance your productivity and streamline your everyday tasks. It comes with a comprehensive user manual, available for free download at manualshive.com. This manual provides detailed instructions on setting up and utilizing the full range of features offered by the Honeywell 7950.

Share
Download
background image

Service Queue QoS Policy Commands

Page 286

7950 XRS Quality of Service Guide

percent-rate

Syntax

percent-rate 

pir-percent

 

[

cir

 

cir-percent

] [

port-limit

|

local-limit

]

percent-rate 

pir-percent

 

police

 [

port-limit

|

local-limit

]

no percent-rate

Context

config>qos>sap-egress>queue
config>qos>sap-ingress>queue

Description

The percent-rate command within the SAP ingress and egress QOS policy enables supports for a queue’s 
PIR and CIR rate to be configured as a percentage of the egress port’s line rate or of its parent scheduler’s 
rate. When the rates are expressed as a port-limit, the actual rates used per instance of the queue will vary 
based on the port speed. For example, when the same QOS policy is used on a 1-Gigabit and a 10-Gigabit 
Ethernet port, the queue’s rates will be 10 times greater on the 10 Gigabit port due to the difference in port 
speeds. This enables the same QOS policy to be used on SAPs on different ports without needing to use SAP 
based queue overrides to modify a queue’s rate to get the same relative performance from the queue.

If the port’s speed changes after the queue is created, the queue’s PIR and CIR rates will be recalculated 
based on the defined percentage value.

When the rates are expressed as a local-limit, the actual rates used per instance of the queue are relative to 
the queue’s parent scheduler rate. This enables the same QOS policy to be used on SAPs with different 
parent scheduler rates without needing to use SAP based queue overrides to modify a queue’s rate to get the 
same relative performance from the queue. If the parent scheduler rate changes after the queue is created, the 
queue’s PIR and CIR rates will be recalculated based on the defined percentage value.

The rate and percent-rate commands override one another. If the current rate for a queue is defined using the

percent-rate command and the rate command is executed, the percent-rate values are deleted. In a similar 
fashion, the percent-rate command causes any rate command values to be deleted. A queue’s rate may 
dynamically be changed back and forth from a percentage to an explicit rate at anytime.

Queue rate overrides can only be specified in the form as configured in the QoS policy (a SAP override can 
only be specified as a percent-rate if the associated QoS policy was also defined as percent-rate). Likewise, 
a SAP override can only be specified as a rate (kbps) if the associated QoS policy was also defined as a rate. 
Queue-overrides are relative to the limit type specified in the QOS policy.

The 

no

 form of this command returns the queue to its default shaping rate and cir rate. When no percent-rate 

is defined within a SAP ingress or egress queue-override, the queue reverts to the defined shaping and CIR 
rates within the SAP ingress and egress QOS policy associated with the queue.

Parameters

pir-percent   — 

The pir-percent parameter is used to express the queue’s PIR as apercentage dependant on 

the use of the port-limit or local-limit.

Values

Percentage ranging from 0.01 to 100.00. The default is 100.00.

cir 

cir-percent 

 — 

The 

cir

 keyword is optional and when defined the required cir-percent CIR parameter 

expresses the queue’s CIR as a percentage dependant on the use of the port-limit or local-limit.

Values

Percentage ranging from 0.00 to 100.00. The default is 100.00

port-limit  — 

The por

t-limit

 keyword specifies that the configure PIR and CIR percentages are relative to 

the rate of the port (including the 

ingress-rate

/

egress-rate

 setting) to which this queue connects.

local-limit  — 

The local-limit keyword specifies that the configure PIR and CIR percentages are relative to 

the rate of the queue’s parent scheduler 

rate

 or 

agg-rate

 rate at egress.

Summary of Contents for 7950





































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 7950

3Com 3CR860-95 - OfficeConnect Secure Router Features And Benefits preview
3CR860-95 - OfficeConnect Secure Router
Brand: 3Com Pages: 2
3Com 3C905-TX Installation Manual preview
3C905-TX
Brand: 3Com Pages: 26
NETGEAR RP334 Specifications preview
RP334
Brand: NETGEAR Pages: 2
MikroTik RouterBOARD SXT 5HnD Quick Setup Manual And Warranty Information preview
RouterBOARD SXT 5HnD
Brand: MikroTik Pages: 2
Surveon EonServ 5000 Series User Manual preview
EonServ 5000 Series
Brand: Surveon Pages: 33
NETGEAR RP614 v2 Installation Manual preview
RP614 v2
Brand: NETGEAR Pages: 2
TP-Link Archer VR500vd Installation Manual preview
Archer VR500vd
Brand: TP-Link Pages: 7
WABCO CAN Router Manual preview
CAN Router
Brand: WABCO Pages: 29
Accton Technology MR3202A User Manual preview
MR3202A
Brand: Accton Technology Pages: 78
Xyclop XC-4CH-NVR-1TB User Manual preview
XC-4CH-NVR-1TB
Brand: Xyclop Pages: 144
Silvertel Ag102 User Manual preview
Ag102
Brand: Silvertel Pages: 9
Airlink101 AR725W User Manual preview
AR725W
Brand: Airlink101 Pages: 64
ETAS ES1337.2 User Manual preview
ES1337.2
Brand: ETAS Pages: 29
Alcatel-Lucent Service Aggregation Router 7705 Installation Manual preview
Service Aggregation Router 7705
Brand: Alcatel-Lucent Pages: 20
Atlantis Land A02-PCI-W54M Specification preview
A02-PCI-W54M
Brand: Atlantis Land Pages: 2
ProCurve J8451A Quick Start Manual preview
J8451A
Brand: ProCurve Pages: 2
Bdcom GP3600-16 Hardware Installation Manual preview
GP3600-16
Brand: Bdcom Pages: 25
IOGear GEU302 Quick Start Manual preview
GEU302
Brand: IOGear Pages: 8

Brands by name

Popular brands

Load more brands