Home
/
Alcatel-Lucent
/
7950
/
Quality Of Service Manual

Alcatel-Lucent 7950, Quality Of Service Manual, Page: 316 / 612

Share

Page: 316 / 612

Alcatel-Lucent 7950 Quality Of Service Manual Download Page 316

Redirection Models

Page 316

7950 XRS Quality of Service Guide

Redirection Models

Two models are supported for forwarding class redirection. In the first, the actual instance of a
queue group to use for forwarding class redirection is named in the QoS policy. This is termed

policy-based redirection

.

In the second model, the forwarding class queue or policers to apply redirection to are identified in
the ingress or egress QoS policy. However, the specific named queue group instance is not
identified until a QoS policy is applied to a SAP. This is termed

SAP-based redirection

.

Policy-based redirection allows different forwarding classes in the same QoS policy to be
redirected to different queue groups, but it requires at least one QoS policy to be configured per
queue group instance.

SAP-based redirection can require less QoS policies to be configured since the policy does not
have to name the queue group. However, if redirected, all forwarding classes of a given SAP must
use the same named queue group instance.

Policy based redirection is applicable to port queue groups on access ingress and access and
network egress, while SAP based redirection is applicable to forwarding plane queue groups on
access and network ingress, and port queue groups on access and network egress.

«
...
314
315
316
317
318
...
»

Summary of Contents for 7950





































































































































































































































































































































































































































































































































































































































Reviews:

No comments