manualshive.com logo in svg

Alcatel-Lucent 7950, Quality Of Service Manual, Page: 277 / 612

Share
Download
Alcatel-Lucent 7950 Quality Of Service Manual Download Page 277

7950 XRS Quality of Service Guide

Page 277

Service Queue QoS Policy Commands

adaptation-rule

Syntax

adaptation-rule 

[

pir 

adaptation-rule

]

 

[

cir 

adaptation-rule

]

no adaptation-rule

Context

config>qos>sap-ingress>queue
config>qos>sap-egress>queue

This command defines the method used by the system to derive the operational CIR and PIR settings when 
the queue is provisioned in hardware. For the CIR and PIR parameters individually, the system attempts to 
find the best operational rate depending on the defined constraint. 

The 

no

 form of the command removes any explicitly defined constraints used to derive the operational CIR 

and PIR created by the application of the policy. When a specific 

adaptation-rule

 is removed, the default 

constraints for 

rate

 and 

cir

 apply.

Default

adaptation-rule pir closest cir closest

Parameters

adaptation-rule — 

Specifies the adaptation rule to be used while computing the operational CIR or PIR 

value. 

Values

pir

 — Defines the constraints enforced when adapting the PIR rate defined within the 

queue

 

queue-id

 

rate

 command. The 

pir

 parameter requires a qualifier that defines the 

constraint used when deriving the operational PIR for the queue. When the 

rate

 command 

is not specified, the default applies.

cir

 — Defines the constraints enforced when adapting the CIR rate defined within the 

queue

 queue-

id 

rate

 command. The 

cir

 parameter requires a qualifier that defines the constraint used when deriv-

ing the operational CIR for the queue. When the 

cir

 parameter is not specified, the default constraint 

applies.

max

 — The 

max

 (maximum) option is mutually exclusive with the 

min

 and 

closest

 

options. When 

max

 is defined, the operational PIR for the queue will be equal to or less 

than the administrative rate specified using the 

rate

 command.

min

 — The 

min

 (minimum) option is mutually exclusive with the 

max

 and 

closest

 

options. When 

min

 is defined, the operational PIR for the queue will be equal to or greater 

than the administrative rate specified using the 

rate

 command.

closest

 — The 

closest

 parameter is mutually exclusive with the 

min

 and 

max

 parameter. 

When 

closest

 is defined, the operational PIR for the queue will be the rate closest to the 

rate specified using the 

rate

 command.

Summary of Contents for 7950





































































































































































































































































































































































































































































































































































































































Reviews:

No comments