manualshive.com logo in svg

Alcatel-Lucent 7950, Quality Of Service Manual, Page: 118 / 612

Share
Download
Alcatel-Lucent 7950 Quality Of Service Manual Download Page 118

Network Ingress QoS Policy Commands

Page 118

7950 XRS Quality of Service Guide

match

Syntax

match

 

[

protocol

 

protocol-id

]

[

no

] 

match

Context

config>qos>network>ingress>ip-criteria>entry

Description

This command creates a context to configure match criteria for an ingress network QoS policy 
match criteria. When the match criteria have been satisfied the action associated with the match 
criteria is executed.

If more than one match criteria (within one match statement) are configured then all criteria must 
be satisfied (AND function) before the action associated with the match is executed.

A match context can consist of multiple match criteria, but multiple match statements cannot be 
entered per entry.

It is possible that a network QoS policy includes the dscp map command, the dot1p map 
command, and an IP match criteria. When multiple matches occur for the traffic, the order of 
precedence is used to arrive at the final action. The order of precedence is as follows:

1. 802.1p bits

2. DSCP

3. IP Quintuple

The 

no

 form of this command removes the match criteria for the entry-id.

Parameters

protocol 

protocol-id

Specifies an IP protocol to be used as an ingress network QoS policy match 

criterion.

Values

The protocol type such as TCP / UDP / OSPF is identified by its respective protocol 
number. Well-known protocol numbers include ICMP(1), TCP(6), UDP(17).protocol-id: 0 
— 255 protocol numbers accepted in DHB 
keywords: none, crtp, crudp, egp, eigrp, encap, ether-ip, gre, icmp, idrp,igmp, igp, ip, 
ipv6, ipv6-frag, ipv6-icmp, ipv6-no-nxt, ipv6-opts, ipv6-route, isis, iso-ip, l2tp, ospf-igp, 
pim, pnni, ptp, rdp, rsvp, stp, tcp, udp, vrrp
* — udp/tcp wildcard

Summary of Contents for 7950





































































































































































































































































































































































































































































































































































































































Reviews:

No comments