Alcatel-Lucent 7950 Quality Of Service Manual Download Page 121

Page: 121 / 612

7950 XRS Quality of Service Guide

Page 121

dst-port

Syntax

dst-port

{

lt | gt | eq

}

dst-port-number

dst-port range

start end

no dst-port

Context

config>qos>network>ingress>ip-criteria>entry>match
config>qos>network>ingress>ipv6-criteria>entry>match

Description

This command configures a destination TCP or UDP port number or port range for a network
ingress QoS policy match criterion.

The

form of this command removes the destination port match criterion.

Default

none

Parameters

lt | gt | eq

dst-port-number

—

The TCP or UDP port numbers to match specified as less than (lt), greater

than (gt) or equal to (eq) to the destination port value specified as a decimal integer.

Values

1 — 65535 (decimal)

range

start end

—

The range of TCP or UDP port values to match specified as between the start and

end destination port values inclusive.

Values

1 — 65535 (decimal)

fragment

Syntax

fragment {true | false}
no fragment

Context

config>qos>ingress>ip-criteria>entry>match

Description

This command configures fragmented or non-fragmented IP packets as a network ingress QoS
policy match criterion.

The

form of this command removes the match criterion and matches all packets regardless of

whether they are fragmented or not.

Parameters

true —

Configures a match on all fragmented IP packets. A match will occur for all packets that have either

the MF (more fragment) bit set OR have the Fragment Offset field of the IP header set to a non-zero
value.

false —

Configures a match on all non-fragmented IP packets. Non-fragmented IP packets are

packets that have the MF bit set to zero and have the Fragment Offset field also set to zero.

Summary of Contents for 7950




































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 7950

Reviews:

Related manuals for 7950

Brands by name

Popular brands

Alcatel-Lucent 7950, Quality Of Service Manual

Search results

Summary of Contents for 7950

Reviews:

Related manuals for 7950

Brands by name

Popular brands