manualshive.com logo in svg

Alcatel-Lucent 7950, Quality Of Service Manual, Page: 219 / 612

Share
Download
Alcatel-Lucent 7950 Quality Of Service Manual Download Page 219

7950 XRS Quality of Service Guide

Page 219

prec 

ip-prec-value

 — 

This parameter is one of two mutually exclusive settings that are applicable to the in-

remark command. The in-remark command can be configured to either remark the DiffServ Code Point 
(DSCP) six bit value or the three Precedence bits. The prec parameter specifies that the matching 
packets Precedence bits should be overridden with the value represented by prec-value.

Values

0 — 7

Default

None (an explicit precedence value must be specified)

multicast-queue

Syntax

multicast-queue 

queue-id 

[

group

 

queue-group-name

]

Context

config>qos>sap-ingress>fc 

fc-name

Description

This command overrides the default multicast forwarding type queue mapping for 

fc

 

fc-name

. The specified 

queue-id

 must exist within the policy as a multipoint queue before the mapping can be made. Once the 

forwarding class mapping is executed, all multicast traffic on a SAP using this policy is forwarded using the 

queue-id

. 

The multicast forwarding type includes the 

unknown 

unicast forwarding type and the 

broadcast

 forwarding 

type unless each is explicitly defined to a different multipoint queue. When the unknown and broadcast 
forwarding types are left as default, they will track the defined queue for the multicast forwarding type.

The 

no

 form of the command sets the multicast forwarding type 

queue-id

 back to the default queue for the 

forwarding class. If the 

broadcast

 and 

unknown

 forwarding types were not explicitly defined to a 

multipoint queue, they will also be set back to the default multipoint queue (queue 11).

Parameters

queue-id — 

The 

queue-id

 parameter specified must be an existing, multipoint queue defined in the 

config>qos>sap-ingress 

context.

Values

Any valid multipoint queue-ID in the policy including 2 through 32.

Default

11

group 

queue-group-name

 — 

This optional parameter is used to redirect the forwarding type within the for-

warding class to the specified queue-id within the queue-group-name. When the policy is applied, all 
packets matching the forwarding class and forwarding type will be redirected to the queue within the 
specified queue group. The 

queue-group-name

 are configured in the 

config>qos>queue-group-tem-

plates

 egress and ingress contexts.

out-remark

Syntax

out-remark dscp 

dscp-name

out-remark prec 

ip-prec-value

no out-remark

Context

config>qos>sap-ingress>fc 

fc-name

Description

This command is used in a SAP ingress QoS policy to define an explicit out-of-profile remark action for a 
forwarding class or sub-class. While the SAP ingress QoS policy may be applied to any SAP, the remarking 

Summary of Contents for 7950





































































































































































































































































































































































































































































































































































































































Reviews:

No comments