manualshive.com logo in svg

Alcatel-Lucent 7950, Quality Of Service Manual, Page: 375 / 612

Share
Download
Alcatel-Lucent 7950 Quality Of Service Manual Download Page 375

7950 XRS Quality of Service Guide

Page 375

queue

Syntax

queue

 

queue-id

 [

queue-type

] [

create

]

no queue 

queue-id

Context

cfg>qos>qgrps>egr>qgrp

Description

This command creates a queue for use in a queue group template. Once created, the defined queue-id acts as 
a repository for the default parameters for the queue. The template queue is created on each queue-group 
object which is created with the queue group template name. Each queue is identified within the template by 
a queue-id number. The template ensures that all queue groups created with the template name will have the 
same queue-ids providing a uniform structure for the forwarding class redirection commands in the SAP 
egress QoS policies. The parameters within the template queue will be used as the default settings for each 
queue in the actual queue group. The queue parameters may be individually changed for each queue in each 
queue group using per queue overrides.

The 

no

 form of the command 

Default

none

adaptation-rule 

Syntax

adaptation-rule

 [

pir

 

adaptation-rule

] [

cir

 

adaptation-rule

]

no adaptation-rule

Context

config>qos>qgrpid>egr>qgrp>queue
config>qos>qgrpid>ing>qgrp>queue
config>qos>qgrpid>ing>qgrp>policer

Description

This command defines the method used by the system to derive the operational CIR and PIR settings when 
the queue is provisioned in hardware. For the CIR and PIR parameters individually, the system attempts to 
find the best operational rate depending on the defined constraint. 

The 

no

 form of the command removes any explicitly defined constraints used to derive the operational CIR 

and PIR created by the application of the policy. When a specific 

adaptation-rule

 is removed, the default 

constraints for 

rate

 and 

cir

 apply.

Default

adaptation-rule pir closest cir closest

Parameters

pir  — 

Defines the constraints enforced when adapting the PIR rate defined within the 

queue

 

queue-id

 

rate

 

command. The 

pir

 parameter requires a qualifier that defines the constraint used when deriving the 

operational PIR for the queue. When the 

rate

 command is not specified, the default applies.

cir  — 

Defines the constraints enforced when adapting the CIR rate defined within the 

queue

 queue-id 

rate

 

command. The 

cir

 parameter requires a qualifier that defines the constraint used when deriving the 

operational CIR for the queue. When the 

cir

 parameter is not specified, the default constraint applies.

Summary of Contents for 7950





































































































































































































































































































































































































































































































































































































































Reviews:

No comments