manualshive.com logo in svg

Alcatel-Lucent 7950, Quality Of Service Manual, Page: 127 / 612

Share
Download
Alcatel-Lucent 7950 Quality Of Service Manual Download Page 127

7950 XRS Quality of Service Guide

Page 127

Network Egress QoS Policy Forwarding Class Commands

This command is used to redirect the FC of a packet of a PW or network IP interface to an egress 
port queue-group. 

It defines the mapping of a FC to a queue-id or a policer-id and a queue-id, and redirects the 
lookup of the queue or policer of the same ID in some egress port queue-group instance. However, 
the queue-group name and instance are explicitly provided only at the time the network QoS 
policy is applied to egress context of a spoke-sdp or a network IP interface. 

The 

no

 version of this command removes the redirection of the FC. 

remarking

Syntax

remarking

Context

config>qos>network 

policy-id

>egress

Description

dscp

Syntax

dscp 

dscp-name

 

fc

 fc-name

no dscp 

dscp-name

Context

config>router>sgt-qos

Description

This command creates a mapping between the DiffServ Code Point (DSCP) of the self generated 
traffic and the forwarding class.

Self generated traffic that matches the specified DSCP will be assigned to the corresponding 
forwarding class. Multiple commands can be entered to define the association of some or all sixty-
four DiffServ code points to the forwarding class. 

All dscp name that defines a dscp value must be explicitly defined

The 

no

 form of this command removes the DiffServ code point to forwarding class association.

Default

none

Parameters

dscp-name — 

The name of the DiffServ code point to be associated with the forwarding class. DiffServ code 

point can only be specified by its name and only an existing DiffServ code point can be specified. The 
software provides names for the well known code points.

Summary of Contents for 7950





































































































































































































































































































































































































































































































































































































































Reviews:

No comments