Albalá Ingenieros | Manual
IPA3000C01
3.6. Interconnection
The following figure shows the IPA3000C01 module rear board connector layout.
Rear view of the IPA3000C01
The IPA3000C01 module includes two inputs (MAIN IN and RES IN) and four DVB-ASI
signal outputs (OUT AUX, OUT AUX, OUT and OUTp). The OUTp connector corresponds to
the output that is protected with a bypass relay such that signal integrity is maintained
in case of a power supply failure or extraction of the module from the mounting frame.
The unit also includes two reference inputs (1PPS and 10MHz) and an RJ-45 Ethernet
port (ETHERNET). Finally, the module has four GPI inputs (F_IP_R, F_IP_M, F_ASI_R and
F_ASI_M) and one GPO output (F_OUT).
The Ethernet port uses an RJ-45 connector. The cable used should be UTP Cat 5 or better
(Cat 5e or Cat 6) in order to guarantee proper 1Gbit/s operation.
16
