Albalá Ingenieros | Manual
IPA3000C01
INPUT_CHANGE
0x02
0x08
Y
N
Signals a change in selected input
0=No, 1=Yes
ENA_ASI_MAIN
0x02
0x10
Y
N
Allows disabling ASI main input when it is not used
0=Disabled, 1=Enabled
ENA_ASI_RES
0x02
0x20
Y
N
Allows disabling ASI reserve input when it is not used
0=Disabled, 1=Enabled
ENA_IP_MAIN
0x02
0x40
Y
N
Allows disabling IP main input when it is not used
0=Disabled, 1=Enabled
ENA_IP_RES
0x02
0x80
Y
N
Allows disabling IP reserver input when it is not used
0=Disabled, 1=Enabled
ASI_MAIN_F_MASK
0x03
0x01
N
N
Allows masking fail in ASI main input
0=Disabled, 1=Enabled
EX_A_MAIN_F_MASK
0x03
0x02
N
N
Allows masking fail in ASI main external input fail
0=Disabled, 1=Enabled
ASI_RES_F_MASK
0x03
0x04
N
N
Allows masking fail in ASI reserve input
0=Disabled, 1=Enabled
EX_A_RES_F_MASK
0x03
0x08
N
N
Allows masking fail in ASI reserve external input fail
0=Disabled, 1=Enabled
IP_MAIN_F_MASK
0x03
0x10
N
N
Allows masking fail in IP main input
0=Disabled, 1=Enabled
EX_I_MAIN_F_MASK
0x03
0x20
N
N
Allows masking fail in IP main external input fail
0=Disabled, 1=Enabled
IP_RES_F_MASK
0x03
0x40
N
N
Allows masking fail in IP reserve input
0=Disabled, 1=Enabled
EX_I_RES_F_MASK
0x03
0x80
N
N
Allows masking fail in IP reserve external input fail
0=Disabled, 1=Enabled
OUT_DELAY
0x04
0xFFFFFF
Y
Y
Output delay refered to 1PPS reference in DVB-T mode
= 100*x ns
ASI_MAIN_PRIOR
0x07
0x03
Y
N
Allows selecting the ASI main input priority
= x
ASI_RES_PRIOR
0x07
0x0C
Y
N
Allows selecting the ASI reserve input priority
= x
IP_MAIN_PRIOR
0x07
0x30
Y
N
Allows selecting the IP main input priority
= x
IP_RES_PRIOR
0x07
0xC0
Y
N
Allows selecting the IP reserve input priority
= x
STAT_RESET
0x08
0x01
Y
N
Allows reseting the statistics measurements
0=No, 1=Yes
STAT_SEL
0x08
0x02
Y
N
Allows selecting the channel to be displayed
0=IP reserve input, 1=IP main input
STAT_MODE
0x08
0x04
Y
N
Allows selecting the statistics mode
0=1/s, 1=Total
IGMP_VERSION
0x08
0x08
Y
N
Allows selecting the IGMP version
0=v2, 1=v3
ETH_MODE
0x08
0x70
Y
N
Allows selecting the Ethernet operating mode
0=Auto, 2=10Mbps HD, 3=10Mbps FD, 4=100Mbps HD, 5=100Mbps FD,
7=1Gbps FD
PING_ENABLE
0x08
0x80
Y
N
Allows making a periodic ping to the unicast address
0=No, 1=Yes
PACKET_DELAY
0x0A
0x7FFF
Y
N
Output delay in TS packets in non DVB-T mode
= x packets
IP_LINK_FAIL_EN
0x0C
0x01
Y
N
IP link lose signals fail in F_OUT GPO
0=No, 1=Yes
IP_DEST_FAIL_EN
0x0C
0x02
Y
N
IP destination absence signals fail in F_OUT GPO
0=No, 1=Yes
BAD_CRC_EN
0x0D
0x10
N
N
Enable receiving packets with bad CRC
0=No, 1=Yes
SPEED_FORCE
0x0E
0x01
Y
N
Allows selecting if the speed/mode is forced or announced for autonegotiation
0=Announced, 1=Forced
MAX_DELAY_TX_IP
0x0F
0xFF
Y
N
Time before starting to transmit after recovering signal
= 10*x ms
EEPROM
Name
add
ext
msk
snmp trap
Description
N_STUFF
0x00
0x30
0xFF
N
N
Number of stuffing bytes (0=packet mode - 255=auto to max.)
= x bytes (255 = auto)
REC_TIME
0x00
0x31
0xFFFF
N
N
Allows adjust of the recovery time
= x/100 s
INVERT_GPI_POL
0x00
0x33
0x01
N
N
Changes input polarity to normally closed
0=No, 1=Yes
30
