Alba LE-28GA06-B3+DVD, Instruction Manual

Page: 16 / 80

16
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Remote control - Inserting batteries
Remove the battery cover on the back of the remote
control, gently push down and pull backwards at the
same time as shown.
Insert two AAA or equivalent type batteries. Ensure the
batteries are inserted the correct way and replace the
battery cover.
Note: When the remote control is not going to be used
for long periods of time, the batteries should be removed.
Otherwise the remote control may be damaged, caused
by battery leakage and corrosion.
Batteries
Switching the TV On and Off
Switching the TV On
With power cord plug connected to the mains power
socket and TV in ‘
Standby
’ mode.
To switch the TV on from standby mode, either:
a: The Remote control; Press the “ ” button.
b: The TV; Press the “ ” button at the
right of the TV.
Switching the TV Off
Either press the “ ” button on the remote
control or press the “ ” button at the right of the TV, the
TV will then switch to standby mode.
Getting Started
Getting Started
You’ll be up and running in no time
AAA X2