background image

20 

Function Card #5 

IMPORTANT NOTE:   

Function Cards 3 through 7 are not recognized by DL-Windows.  Therefore, DL-Windows will not send the data for 
Function Cards 3-7 to the AL-DTM, nor will the AL-DTM be able to send this Function Card data to the PL3500 
lock.  Accordingly, Function Cards are designed to be used for limited-use installations where DL-Windows will not 
be used.  When User Numbers are printed in the Audit log, Function Cards 3-7 will appear as User Numbers 
2003-2007. 

Toggles 

Passage Mode

 (Door Is Unlocked) 

When Function Card #5 is presented, Passage Mode is enabled (PL3500 remains unlocked indefinitely).  
When Function Card #5 is re-presented, Passage Mode is disabled, and the PL3500 re-locks and resumes its 
normal operation.   
 
Enter Passage Mode as follows: 

Present Function Card #5 to the lock.  After unlocking, the green LED blinks twice, accompanied by a 
beep, and a delayed red LED flash. 

 
Exit Passage Mode as follows: 

Present Function Card #5 to the lock.  After relocking, the green LED blinks twice, accompanied by a 
beep, and then a red LED flash.  The lock resumes its normal operation. 

Function Card # 5 

Summary of Contents for Trilogy ETPL





























Reviews: