17
Function Card #2 (cont'd)
IMPORTANT NOTE:
When programming is sent from DL-Windows (or an AL-DTM) to the lock, Function Cards 1, 2, 8, and 9 will be overwritten
with the existing data in DL-Windows for the User Locations 298, 299, 297 and 300, respectively. Therefore, to continue to
use Function Cards 1, 2, 8 and 9 that were enrolled at startup with DL-Windows,
be sure to enroll those same Function
Cards 1, 2, 8 and 9 used at startup into the correct locations within DL-Windows.
For complete instructions, see the
DL-Windows User Guide
, OI237.
RECEIVE PROGRAM FROM THE LOCK TO THE AL-DTM
DL-Windows must be first used to instruct the AL-DTM to "Receive Program From Lock" via the
DTM Support
screen.
This way, when the AL-DTM is connected to the PL3500 lock, the AL-DTM will perform the correct operation.
1.
Connect the AL-DTM to the Lock.
Connect the double-ended banana plug into the AL-DTM and into the lock
that is to be programmed (observing proper tab direction).
2.
Press the Green Button on the AL-DTM
until the AL-DTM displays the following:
The AL-DTM displays the following:
3.
Present Function Card #2 to the lock
. The AL-DTM will display the following:
Packet Numbers will go up until all packets have been transferred to the AL-DTM. The Lock will continue to beep
while in communication with the AL-DTM.
4.
At the end of the transfer process
, the PL3500 will sound a series of beeps. You can disconnect the AL-PCI2
cable. The following will display:
LOCK MODE
YES
NO
Door 08, Receiving
PGM Packet 008
Lock's Time and
Date, Updated.
Comm. Complete,
07/24/04 02:28PM
(Current date and Time)
0993 FREE
MEMORY BLOCKS
(Current Memory Status)
Press the left black button (answer YES).
Waiting for Lock
Power Up or Code
