Page 1: ...e124mmx243mmX3 5mm 3Cv32 X9 1 932 X4 32 recess for Lock CASE unti latch fuca is a u V a 1 Drifl 46rnm1 1316 40 16 hole for cylinder trom boh idca of door 2 Drill 25mm 1 ho18 for level ftom boh sidca of door 3 Drill 1omm 38 hole for wire from bolh slde6 of door 4 Drill 2x10mm 3 8 hole for scr ws rom both sides ofdoor ffi ffi iilh H l Align template or edge of door with applicable horhontal at heigl...
Page 2: ...irection of turn piece is in the wrong place Move receiver module and turn the turn piece to the opposite direc tion lnstal again and check the operation of deadboll 5 Connect exterior wire connector to interior wire connector 6 Secure the receiver module to mounting plate rvith 3 screws OIMPORTANT 1 Be careful about the wire Do not block the screw holes at the time of mounling the screws 2 Locksh...
