25
MAINTENANCE
All adjustments of the burner may be
easily made in that part of the burner. This
is because the burner can be taken out of
the boiler with the help of the hinge
system. It can then be re-assembled back
into the boiler and fixed (See figure 1).
The nozzle and electrodes are easily
accessible after the diffuser and
electrode group are removed from the
boiler with the help of the hinges. The
nozzle is removed as follows:
a)
Unscrew the bolt (1) and take the
diffuser group out (See figure 2).
b) Use two spanners to remove the
nozzle. Care should be observed not to
damage the nozzle during removing (See
figure 3).
c) The replacement and the adjustment
of the electrodes can be performed by
removing the bolt (See figure 4).
Figure 1
Figure 2
Figure 3
Figure 4
