Alamo RX96, Operator'S Manual, Page: 88 / 172

ASSEMBLY
RX96 03/09 Assembly Section 3-4
© 2009 Alamo Group Inc.
ASSEMBL
Y
TONGUE
Attach clevis weldment (3) to tongue weldment (1) using bolt (11), and locknut (12). Then attach tongue
weldment (1) to mower deck lugs with pin (6), bushing (8), and secure with locknut (9). Make sure that jack
mount tube (5) and (4) are attached to tongue and deck lugs. Attach parking jack (15) to mount tube (5) when
in storage and (4) when in operation or transport.
Note: Attach Safety Chain (27) to Tongue when in transport.
Figure Asm-R-0285.
AXLE ASSEMBLY - PULL TYPE
Attach the rear axle to the lugs on the rear of the mainframe using axle pivot pins (2), bolts (13), and locknuts
(8).
Figure Asm-R-0284