Alamo RX96, Operator'S Manual, Page: 83 / 172

INTRODUCTION
RX96 03/09 Introduction Section 2-3
© 2009 Alamo Group Inc.
INTRODUCTION
These mowers are available in lift, pull, or semi-mount, or hydraulically offset semi-mount type hitch
configurations. These rugged mowers are designed for medium-duty work. They can mow pastures, cut brush
up to 2-1/2” in diameter, and control grass and weeds on highways or industrial sites.
The 8’ Lift Type Machines require a minimum of 50 HP with adequate front end weight.
For Non-Agricultural use, OSHA, ASAE, SAE, and ANSI standards require the use of Chain
Guards, Deflectors, or Solid Skirts at all times. The Mower manufacturer strongly
recommends the use of Chain Guards or Rubber Deflectors for Agricultural purposes as
well, to reduce the risk of property damage, serious bodily injury, or even death from objects
thrown out by or from contact with the Cutting Blades.
At least 20% or the tractor’s weight must be on the front tires with the Mower lifted to provide
adequate traction for safe steering under good conditions. Slow down on hills, rough terrain,
and curves.
Front and rear, and left and right are determined by the normal direction of travel (the same as on your
automobile).
LIFT TYPE MODEL
PULL TYPE MOWER