6) At the below pop-up, you can put [FTP site name, FTP address, ID, Password, Port, select Passive].
Webpage N
☞
ame : The FTP nick name that MG-350HD accesses to. You can make a nick name as you
want.
FTP Address : FTP Server IP address that MG
☞
-350HD accesses to.(ex, test.goanygate.com )
I D : FTP Server ID that MG
☞
-350HD accesses to.(ex, mediagate)
Pas
☞
sword : FTP Server passwordIP address that MG-350HD accesses to (ex, 222)
Port : FTP Server port number that MG
☞
-350HD accesses to (ex, 21)
Passive : In case, the FTP server is located behind a router or firewall, check “v “ at [Passive]
☞
mode.
7) If press [OK] button on the remote control, the server setup is saved and MG-350HD goes to the indicated
server.
->Remote means the FTP server and local means the FTP client (MG-350HD disk)
77
Summary of Contents for MediaGate MG-350HD
