469892_a
55
Help in case of malfunction
Battery
127390
Rated voltage
36 V / 42 V max.
Rated capacity
7.5 Ah
Charging duration
approx. 150 min
Charging unit
127391
Mains voltage
230 V (AC)
Mains frequency
50 Hz
Output voltage
42 V (DC)
Operating temperature range
0 °C – +40 °C
14 HELP IN CASE OF MALFUNCTION
CAUTION!
Risk of injury
Sharp-edged and moving appliance parts can lead to injury.
■
Always wear protective gloves during maintenance, care and cleaning work.
■
Switch off the appliance and remove the rechargeable battery.
Malfunction
Cause
Remedy
Engine does not run.
No battery voltage present.
Have the power supply checked by
a qualified electrician.
Overload protection has
switched off.
Wart until the overload protection re-
establishes the power supply.
Chain brake engaged.
Release the chain brake.
The guide rail and saw chain
become hot when running.
Generation of smoke.
The saw chain is tensioned
too tightly.
Reduce chain tension.
Oil tank is empty.
Replenish the saw chain oil.
Inspect the oil tank for damage.
The oil entry hole and/or
groove of the guide rail are
dirty.
Clean the oil entry hole and groove
of the guide rail.
Motor running, but the saw
chain does not move.
The saw chain is tensioned
too tightly.
Reduce chain tension.
Appliance faults
Contact an AL-KO service centre.
Only sawdust is thrown out,
rather than wood chips. The
chain saw has to be pushed
through the wood.
The saw chain is blunt.
Sharpen the saw chain or contact an
AL-KO service centre.
Appliance vibrates unusually.
Appliance faults
Contact an AL-KO service centre.
Summary of Contents for Solo CS 4235
