background image

Indication

Event

Indication

Note

Alarm.

Beeps, the LED frame blinks
red.

The duration and volume of
the sound signal depend on
the siren settings.

An alarm is detected in the
armed system

(if the post-alarm indication is
on).

The siren LED frame blinks red
twice in the lower right corner
every 3 seconds until the
system is disarmed.

The indication turns on after
the siren has completely
played the alarm signal
con gured in settings (if
enabled).

Power connection.

The LED frame lights up once.

The security system is armed

(if indication is enabled).

The frame blinks once, the
siren emits a short beeps one.

The volume of the sound
signal depends on the siren
settings.

Security system is disarmed

(if indication is enabled).

Blinks twice with the LED and
beeps twice.

The volume of the sound
signal depends on the siren
settings.

Siren in the armed mode

(if indication is enabled).

The LED frame in the lower
right corner is permanently on.

5. 

Select the events to be noti ed by the siren (depending on the device):

If a door or a window is open.

If an external contact is open (available if the 

External contact

 option is

enabled).

6. 

Select the chime sound: 1 to 4 short beeps. Once selected, the Ajax app will
play the sound.

7. 

Click 

Back

 to save and apply the settings.

8. 

Repeat steps 2–7 for other detectors for which you need to enable the
noti cations.

Summary of Contents for StreetSiren Fibra





























Reviews: