When connecting to the device terminals, do not twist the wires together; solder
them. The ends of the wires that will be inserted into the terminals should be
tinned or crimped with special tips. This will ensure a reliable connection.
Follow
safety procedures and regulations for electrical installation work
.
In order to install a siren:
1.
Disconnect the hub external power supply and the backup battery.
1 — External power supply
2 — Backup battery
2.
Run the siren connection cable into the hub casing and connect the wires to
the bus.
+24V
— power supply input
А, B
— signal terminals
GND
— ground
3.
Remove the SmartBracket mounting panel from the siren enclosure and
carefully break out the perforated part to lead the cable out.