formed, which will continue to operate normally and transmit events to the hub. If
the ring is broken, the users and security company receive noti cation.
8.
Attach the SmartBracket mounting panel to a vertical surface with the
bundled screws. When using other fasteners, make sure they do not
damage or deform the mounting panel. The recommended installation
height is 2.5 meters or more.
Don’t use double-sided adhesive tape for temporary or permanent xation of the
siren, as the device may come off the surface at any time.
9.
Place the siren on the SmartBracket mounting panel.
10.
Secure the siren with a screw. This reduces the risk of burglary and
sabotage.
11.
Turn on the hub to supply the connected siren with power. When power is
applied, the siren’s LED frame will notify that the device is turned on.
12.
.
Add StreetSiren Fibra to the system
13.
Conduct the Fibra signal strength test. The recommended signal strength
value is two or three bars. Otherwise, check the connection and the
condition of the cable.
14.
. If the siren is hard to hear, change the
volume or move the device.
