level for noti cations about
arming/disarming, entry/exit
delay, and opening:
The volume level is measured
1 m away from the siren.
Setting up the processing of detector alarms
Through the Ajax app, you can con gure which detector alarms can activate the
siren. This will help to avoid situations when the siren sounds on water leak
detection or any other alarm.
The parameter is adjusted in the detector or settings:
Setting the tamper alarm response
The siren can respond to alarms of hub tampers, devices, and detectors within
the system. The option is disabled by default. The tamper reacts to the opening
and closing of the enclosure even if the system is not armed!
For the siren to respond to tamper triggering, in the Ajax app:
Quiet
— 88 dB volume
Loud
— 94 dB volume
Very loud
— 112 dB
volume
1.
Sign in to the Ajax app.
2.
Go to the
Devices
tab.
3.
Select the device.
4.
Go to its settings and set the necessary parameters for activating the
siren.
1.
Go to the
Devices
tab.
