AJA OG-X-FR Installation And Operation Manual Download Page 35 | Manualshive

Page: 35 / 56

AJA OG-X-FR Installation And Operation Manual Download Page 35

OG-X-FR openGear Frame v1.0r1 35 www.aja.com

To manually add an OG-X-FR frame to a DashBoard Tree View

1. Click from the Tree View toolbar. The Select Equipment or Service Type

to Add dialog opens.

2.  Expand the openGear / DashBoard Connect node.
3.  Select TCP/IP DashBoard Connect or openGear Device.
4.  Click Next >. The New TCP openGear Frame Connection dialog opens.

5. In the IP Address box, type the IP address of the OG-X-FR frame.

To request that DashBoard detect the frame properties automatically

1. Click Detect Frame Information.
2. Verify that DashBoard retrieves the correct port, name, unique identifier,

and other connection information from the specified IP address.

3. Verify that the Automatically Track Updates to Frame Information box is

selected so that any changes are automatically updated in DashBoard.

To specify frame properties manually

1.  Type the name of the OG-X-FR frame, as you want it to appear in DashBoard.
2.  From the Protocol options select OGP (openGear Protocol).
3.  Use the Port field to specify the port used for communication.
4.  Select the Remember connection settings for this frame box to retain

the settings.

5. Click Finish to display the OG-X-FR frame in the Tree View.

NOTE: OG-X-FR frames added to the Tree View are also displayed in the Advanced Tree

View.

6. Repeat the procedure for each OG-X-FR frame that you wish to add to the

Tree View.

Re-naming the OG-X-FR Frame in the Tree View

Once your OG-X-FR frame displays in DashBoard, you may wish to provide a

unique display name for the frame for easier identification in the Tree View. There

are two methods for re-naming an OG-X-FR frame in DashBoard depending on

how you added the frame to the Tree View in DashBoard. The first method is for

frames manually added to the Tree View. The second method describes how to

re-name an auto-detected frame using the DashBoard menu options available on

the Network Controller Card. Both methods are described below.

To re-name a manually added OG-X-FR frame

1. Right-click the OG-X-FR frame you wish to rename.
2. Select Rename Frame.

«
...
33
34
35
36
37
...
»

Summary of Contents for OG-X-FR

























































Reviews:

No comments