74
You may wish to use a different Io HD output for final Print-to-tape from Final
Cut. You can select that in this window by clicking the checkbox “Different Output
for Edit to Tape/Print to Video.” This allows you to select via a pull-down menu any
Io HD video output and audio output.
The window also allows you to turn on and off device and audio output warnings.
Checking the System with a Simple Test Project of Bars and Tone
To test that you’ve installed the Io HD drivers and have audio and video monitoring
correctly configured, try creating a simple Final Cut Pro project with bars and tone.
1.
Select an Easy Setup as previously discussed (go to the Final Cut Pro menu
and select
Easy Setup
; then select a desired preset).
2.
Select
New Project
from the File menu.
Create a New Project
3.
The Sequence window will be at the bottom of the screen and a Browser
window will be at the top left. Look at the Browser window and locate the
“Effects” tab at the top right. Click on it.
4.
Locate the Viewer window in Final Cut Pro and click on the generators menu
button (it’s a “filmstrip” icon with an “A” on it). Select “Bars and Tone
NTSC” or the appropriate Bars and Tone for your format and frame rate. The
viewer window will display bars after you do this.
5.
Click the mouse cursor on the Bars and Tone in the Viewer window and drag
it to the beginning of the sequence window. You’ll see the bars and tone show
up on the sequence where it can then be played.
6.
Go to the beginning of the sequence by clicking on the left-most icon and
then click the “Play” icon. You should see and hear the bars and tone on your
video monitor and audio monitoring system.
Summary of Contents for io hd
