AJA io hd, Installation And Operation Manual

Page: 58 / 110

48
SDI Output
Tab Screen The SDI Output tab shows the current settings for both of the SDI outputs.
Because the outputs can be configured independently, one output may be the
Primary format and the other output may be the Secondary format. If an input/
output has no video, it will be indicated on the block diagram (“No Video”).
AJA Control Panel, SDI Output Tab
SDI Output Tab Screen Settings
Separate information panes will be listed (as applicable) for SDI Outputs 1 and 2.
Information that can appear includes the following items. You can view the current
setting or click on another to change to it:
Primary —when selected, this indicates that the SDI output is set to the same
format as the framebuffer. That value will be listed in blue.
Secondary —when selected, this indicates that the SDI output is set to a format
different from the framebuffer (Primary Format). That secondary format value
will be listed in green. This shows that active processing of the video is taking
place (format change and possibly even up/down/cross-conversion).