50
Analog Out Tab
Screen
Io HD provides a high-quality analog component or com Y/C output,
generally used for monitoring. This screen shows the current settings for that analog
output, and allows you to re-configure it when desired (format). Radio buttons
allow you to select primary or secondary format—which could enable up/down/
cross-conversion.
Note:
Composite and Y/C (S-Video) are only able to support SD signals, not HD.
AJA Control Panel, Analog Out Tab
Analog Out Tab Screen Settings
Primary/Secondary—
this pulldown selects whether the framebuffer format
(Primary) or a conversion is applied to the analog output (Secondary).
Analog Format
—choices in the Analog Format pulldown menu vary depending
upon the Analog Output video standard. The composite or Y/C is only
available when an SD (525i29.97 or 625i25) format is in use or
downconversion from HD has been selected.
Analog formats can include:
Component (SMPTE/EBU N10)
Component (Beta)
Component (RGB)
Component (RGB -HV)
Monitor Audio
—here you can select which two channels will be mapped to the
unbalanced analog audio outputs (the two RCA connectors).
Summary of Contents for io hd
