HELO Plus H.264 Streaming and Recording Encoder v1.0 74 www.aja.com
Firmware Update Procedure
1. Check the AJA website for new firmware.
2. If new software is found, download it and uncompress the file archive (.zip).
3. Connect the device to a Mac or PC via a USB port on the computer.
4. Click on the
Update
tab, click on the
Browse
button, navigate to the
firmware (.ajas extension), open it, and confirm the update. Progress will be
shown via the “Progress” bar.
5. After the update, the AJA device must be rebooted by clicking on the
Reboot button in the prompt window.
Info Tab Screen
This tab provides basic information about the connected AJA device. This
information is useful when calling AJA Support for service or technical support.
System Name
This field allows you to give your AJA device a unique name. This can be useful if
you have several attached to a Mac/PC via USB so you can distinguish between
them easily. Enter the desired name, then click Set System Name.
NOTE: International characters are fully supported in the system name.
Type
This is the factory set model name of the AJA device.
Authentication
If Authentication has been Enabled on the web browser Access tab, you can
disable the security feature by clicking on the Disable button.
