HELO Plus H.264 Streaming and Recording Encoder v1.0 65 www.aja.com
2. Choose Stream
3. Select Stream Type RTSP over UDP
4. Enter URI rtsp://(IP Address/Stream Name)
5. Click OK
Additional information is available at
Wirecast
TeleStream's Wirecast application lets you capture, produce, and stream to
integrated streaming services & CDNs. HELO Plus can be used as an input source
via RTSP stream.
Wirecast Configuration Summary
1. Add web stream
2. Change protocol to RTSP
3. Stream options: RTSP over UDP
4. Format Options: Auto Detect
5. Check Live Stream
6. Enter URI of the HELO Plus
7. Click Connect
NOTE: Wirecast may take a few seconds to initialize the incoming stream and show
video in the Wirecast UI.
Additional information is available at
https://www.telestream.net/wirecast/
Wowza
Wowza Media Systems offers a Streaming Server that can be run on either a local
or cloud based server. For general information about Wowza Media Systems, see:
For instructions on installation and configuration, see the following:
https://www.wowza.com/docs/how-to-install-and-configure-wowza-streaming-
NOTE: This section assumes that you have already installed and configured the local
Wowza Streaming Engine media server.
Gather Wowza Application Connection Settings
Once you have installed and configured your local Wowza Streaming Engine
media server, follow these steps to gather your Wowza Application Connection
Settings, then enter them into your HELO Plus's Stream 1/2 Output configuration.
1. Launch a web browser, then navigate to your local server installation of the
Wowza Streaming Engine Manager.
2. In the left column, under the "Selected Application" heading, select the
application you want to use.
3. From the selected application sub-menu, select "Sources (Live)". The
Sources (Live) page displays.
