Airvana ipBTS C30 Installation and Commissioning, Release 4.0
B-1
Appendix B
Hot-swapping ipBTS hardware
This appendix describes how to replace a failed component in the field. The ipBTS contains
the following hot-swappable and Field Replaceable Units (FRUs):
•
RN shelf components:
•
Radio module
•
Fan Trays
•
Air filter
The ADCC module is also FRU but replacing the module causes a service disruption:
Specifically this appendix includes the following information:
•
•
•
•
•
Replacing a Radio module
Use this procedure to replace a radio module in an ipBTS C30 shelf.
Tools required
To replace a radio module you will need the following tools:
•
#2 phillips-head screwdriver
•
Torque wrench with appropriate N-connector attachment for RF cables
•
Torque wrench with appropriate SMA connector attachment for SMA cables
Summary of Contents for ipBTS C30
