AirLive OD-2060HD User Manual Download Page 54

Page: 54 / 104

4. Administrating the Device

AirLive OD-2060HD User’s Manual

Restore Setting:

Click the “Browse” button to locate the saved backup file and then click the “

Restore

Setting

” button. The settings will be restored to the previous configuration.

Firmware Upgrade:

The device supports new firmware upgrade (the software that controls the operation in

the device). Please contact your dealer for the latest version if necessary.

Download the latest firmware file from our website or your dealer. Unzip this firmware

file to binary file and store it into your PC. Then follow the steps as bellows carefully:

1. Close all other application programs which are not necessary for firmware update.

Make sure that only you access this device while firmware updating.

3. Disable Motion Detection function.

4. Click “

Browse

” button. Select the Firmware binary file.

(

Note:

that it must make sure that the Firmware only applies to this device, once

update, it will be burned into FLASH ROM of system.

)

5. Once the firmware file is selected, click on the “

Firmware Upgrade

” button.

Summary of Contents for OD-2060HD









































































































Search results

Summary of Contents for OD-2060HD

Reviews:

Related manuals for OD-2060HD

Brands by name

Popular brands

AirLive OD-2060HD, User Manual

Search results

Summary of Contents for OD-2060HD

Reviews:

Related manuals for OD-2060HD

Brands by name

Popular brands