AirLive OD-2060HD User Manual Download Page 39

Page: 39 / 104

4. Administrating the Device

AirLive OD-2060HD User’s Manual

4.1.6 UPnP

UPnP is short for Universal Plug and Play, which is a networking architecture that provides

compatibility among networking equipment, software, and peripherals. This device is an

UPnP enabled Network Camera. If your operating system is UPnP enabled, the device will

automatically be detected and a new icon will be added to “My Network Places.” If you do

not want to use the UPnP functionality, it can be disabled.

In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT

traversal when your device is located on an intranet (LAN) and you wish to make it

available from the other (WAN) side of a NAT router. With NAT traversal properly

configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to

the device.

UPnP:

To enable or disable the UPnP service here.

Summary of Contents for OD-2060HD









































































































Search results

Summary of Contents for OD-2060HD

Reviews:

Related manuals for OD-2060HD

Brands by name

Popular brands

AirLive OD-2060HD, User Manual

Search results

Summary of Contents for OD-2060HD

Reviews:

Related manuals for OD-2060HD

Brands by name

Popular brands