AirLive OD-2060HD User Manual Download Page 9

Page: 9 / 104

1. Introduction

AirLive OD-2060HD User’s Manual

1.2 Package Contents

User can find the following items in the package:

1. OD-2060HD

is the main element of the product.

2. Accessory Packet

3. Power Adapter

dedicates 12V DC electric power output to Network Camera.

4. User’s Manual CD

provides installation software, application program, important

information and instructions for operating the Network Camera.

5. Quick Start Guide

provides important information and instructions for installing this

device.

If any of the above items are missing, please contact your dealer immediately.

Note: Using a power supply with a different voltage than the one included with the Network

Camera will cause damage and void the warranty for this product.

1.3 Physical Description

Front View

Summary of Contents for OD-2060HD









































































































Search results

Summary of Contents for OD-2060HD

Reviews:

Related manuals for OD-2060HD

Brands by name

Popular brands

AirLive OD-2060HD, User Manual

Search results

Summary of Contents for OD-2060HD

Reviews:

Related manuals for OD-2060HD

Brands by name

Popular brands