AIR2G2 AIR2G2-336, Owner'S/Operator'S Manual

Page: 33 / 63

3 4
•
Disconnect the battery or remove the spark plug wires before making any repairs. Disconnect the negative
terminal first and the positive last. Reconnect the positive first and the negative last.
•
Keep hands and feet away from moving parts. If possible, do not make adjustments with the engine running.
•
Charge the battery of the machine in an open, well-ventilated area, away from sparks and flames. UNPLUG the
charger before disconnecting or connecting the charger from the battery. Always wear protective clothing and use
insulated tools. It is not recommended to “jump start” the battery.
•
Keep all parts in good working condition and all hardware on the machine tightened. The decals must be replaced
when worn or damaged.
• Probe replacement – loosen the four (4) nuts under the cylinder flange, twist the loosened cylinder clockwise and
lift up and out of the cylinder tubes. You will now be able to either change or inspect the probe. When changing
probes, be sure to manually move the cylinder rod up and down, 2-3 times, to push any excess moisture from the
cylinder before installing. After inspection, replace the cylinder by setting the cylinder flat on the cylinder flange.
Rotate counter-clockwise and tighten the nuts securely. When tightening the nuts use a star pattern: first nut, go
across to 3
rd
nut, then left for number 2 nut and finish by tightening number 4 nut.
•
Use only GT AIRINJECT INC approved parts. The warranty on the machine may be VOIDED if genuine approved
parts are not used.
•
Warranty may be voided if machine has not been operated for over a six (6) month period.
•
Warranty on some parts may be voided if machine is operated in any other manner other than that
recommended by the manufacturer herein; i.e. riding the machine may cause damage to the PLC, DASH
AND/OR TOP COVER.
•
Using the wrong size probes on the cylinders will void the warranty