AIR2G2 AIR2G2-336, Owner'S/Operator'S Manual, Page: 20 / 63

21
8) Fuel is flammable. DO NOT use cigarettes, matches, or operate the machine near any open flame or extreme
heat.
9) Do not operate the machine in any unventilated room. Noxious, exhaust gas is discharged from the engine.
Carbon monoxide can cause death when inhaled. Use the machine only outdoors.
10) When operating the machine DO NOT TOUCH HOT PARTS , i.e. the muffler, compressor parts around the spark
plugs, rotating parts and air tank.
11) When blowing air be careful of soil scattering. Proper eye protection is advised.
DO NOT BLOW AIR WHEN PEOPLE ARE NEAR .
12) This machine is not to be used on highway, concrete or stone.
13) Proper clothing, shoes, eye protection are advised.
CAUTION! EAR PROTECTION IS REQUIRED.
14) Parking the machine after use:
•
Check the probes (3) and probe tips for any damage.
• With the beam locked in the UP position, drain all air pressure. When pressure is “0” manually pus h the
cylinder rods downward.
• You can now check the tips underneath the pressure pads for damage.
• Loosen the 4 (four) 7/16” nuts underneath the cylinders – ONLY LOOSEN. Turn the cylinder clockwise and lift
the cylinder up. You can now visually see, inspect or change any or all probes and/or tips. When changing the
probes, be sure to manually move the cylinder rod up and down, 2-3 times, to push any excess moisture from
the cylinder before installing. Set the cylinder back on the cylinder mount base.
• Turn the cylinder counter clockwise and tighten the 4 (four) 7/16” nuts. Tighten in a star pattern: #1, #2 (straight
across), #3 (to the left from #2), #4 (straight across from #3).