AIR2G2 AIR2G2-336, Owner'S/Operator'S Manual

Page: 29 / 63

30
THE FOLLOWING PAGE YOU WILL FIND THE PLC FUNCTION KEYS
FUNCTION KEYS FOR THE PLC
S
ET
K
EY
B
ACK
K
EY
TO OPERATE THE PLC
Turn toggle switch up to the ON position. Screen will read 1=AUTO / 2=MANUAL. Press 1=AUTO. Screen will read
“TRIGGER TO START”.
Push the two thumb switches located at the end of the handle bars simultaneously. Process will begin after each
cycle, move the machine FORWARD or REVERSE 2-1/2 to 3 feet and repeat process.
NOTE: IN CASE OF
EMERGENCY
, PUSH THE
EMERGENCY STOP BUTTON
OR TURN THE TOGGLE
SWITCH DOWN TO OFF. THE MACHINE WILL RETURN ALL FUNCTIONS TO THE HOME POSITION.
ALL SETTINGS ARE FACTORY SET.
OTHER PLC FUNCTION KEYS
There are two (2) function keys for the operator to use.
• With the PLC in 1=AUTO / 2=MANUAL.
•
Press 5 and HOLD for 3 seconds. Screen will read “AIR2G2 REVISION 6.2”.
• Press 7 & 9 and HOLD SIMULTANEOUSLY. Screen will read HOURS - # OF HOURS MACHINE HAS
OPERATED. PRCT (Probe Count) - # OF TIMES PROBES HAVE INJECTED.
• Press BACK KEY . 1=AUTO / 2=MANUAL.
•
Press 6 and hold for 3 seconds; screen will read FACTORY SETTINGS press 1=yes 2=no, Press 1
•
Press BACK KEY to 1=AUTO / 2=MANUAL