Air Techniques Rxonly ProVecta 3D Prime, Operating Instructions Manual

Page: 22 / 60

5.5 Exposure button
Exposure switch
The exposure switch is used to trigger the pre-
pared image acquisition and start the X-ray expo-
sure. The LED indicates the status of the unit, as
does the LED on the unit.
– Green: unit ready for recording
– Yellow: X-ray beam active
1
2
1 Indicator lamp (LED)
2 Exposure button
5.6 Memory card slot
The unit has a slot for a memory card. The slot is
needed for service purposes only.
5.7 Sensor window
The active sensor surface is indicated by the
markers in the corners of the sensor window.
The cross indicates the geometric mid-point of
the active sensor surface.
1
2
1 Active sensor surface
2 Geometric mid-point of the active sensor
surface
Product description
20 2210200496L41 1911V006
EN-
US